White Wood 10mm Bathroom Panels (250mm x 2.6m | Pack of: 4 | Marbrex)
In areas prone to moisture, natural wood is often avoided despite it's beauty, our Marbrex white wood bathroom wall panels are the ideal substitute to get the desired look. Waterproof and wipeable, Marbrex white wood paneling adds a realistic finish and a softened warmth to a room.
Where can these wall panels be fitted?
- To the walls and ceiling of any room in the house, office, factory or food preparation area. Including shower cubicles with a power shower up to maximum 60ºC.
- To damp or damaged walls by fitting 38mm x 19mm battens horizontally at 600mm centres with screws into wall plugs and, if required, a breather membrane.
- To a wall or ceiling with a clean flat surface using adhesive (no battening required).
- To a wall or ceiling with ceramic tiles, using a moisture cure or solvent free adhesive (tiles do not have to be removed).
How do you clean these panels?
Apply a non-abrasive household cleaner (can contain bleach in solution) with a soft cloth or sponge. Do not use neat bleach. Rinse with water.
Where should these wall panels not be fitted?
These panels should not be used in steam rooms where hot spot temperatures may exceed 60ºC
|Important Information||Due to manufacturing processes, some colour variation can occur between batches. Please retain the batch number found on the product packaging or the back of the panels.|
|Use With||Walls and ceilings.|
|Storage Advice||All of our products should be stored flat, out of direct sunlight and all courier packaging must be immediately removed.|
|Brand Colour||White Wood|
|Join||Tongue and Groove|